Dome Light Replacement Procedure for Infiniti M-series
Here is a do it yourself step by step narrative for those of you who have had issues with the dome light bulbs. Most of the LEDs have the polarity wrong, and since these are not wedge bulbs, they...
View ArticlePainting VQ35DE Valve Covers
Applied Vehicle(s): Vehicles w/ VQ35DE Engine Difficulty Rating: Estimated Labor Time: 2½ hours Written By: tollboothwilley Estimated Total Cost: $20.00 Find related tutorials and information on your...
View ArticleRemoving OEM Radio and Installing GROM USB/iPod Adapter
Applied Vehicles: 2006-2010 Infiniti M35, Infiniti M45 Difficulty Rating: Estimated Labor Time: 1½ hours Written By: IlyaKol Estimated Total Cost: $140.00 Find related tutorials and information on...
View ArticleM45 Sport headlight conversion
So I decided to embark on sporting out my non-sport headlights to get a closer match with my paint color and grill. It took me a day start to finish and the cost was about $20. Sorry I don’t have step...
View ArticleNissan Fuga Owners Meet… in Japan! (Part 2)
Another guy I spoke with had a 350GT that had quite a bit of work done to it. It was dropped on Tanabe suspension, riding on a set of one-off 21 X 9.0J wheels wrapped in 245/30 rubber. Under the hood,...
View ArticleNissan Fuga Owners Meet… in Japan! (Part 3)
Pretty much all the Fuga owners had done tasteful modifications. Most had some kind of car audio/video set up, or LED lighting inside and outside the car, but nothing extreme or over the top. After...
View ArticleNissan Fuga Owners Meet… in Japan! (Part 4)
A short time later, a crew of some other tuners showed up. One car was especially nice, a Z32 Fairlady. There was also an S13 coupe with bolt on overfenders, but under the hood was pretty nasty...
View ArticleHow to: Stop Oil Consumption in your 2003-2004 Infiniti M45
Infiniti M45 Oil Consumption issues can be partially, if not completely, addressed by the installation of an oil catch can. We'll show you how!
View ArticleNissan Fuga Owners Meet… in Japan!
One of the NICOclub Moderators attends a Nissan Fuga (Infiniti M35 / M45 here in the US) owners' meet in Japan and reports back with pictures... You've GOTTA see this!
View ArticleInfiniti M45 Catch Can Installation
I did this mod this weekend. I put it right at the intake from the PCV to the throttle body. No problems, no codes thrown afterwards. It went pretty well overall. I’m not convinced, however, that this...
View Article
